Neutral curing. It does not release any acid and can be applied to sensitive metals.
Pure silicone, does not contain any organic extender.
Almost odorless cure.
Resists shrinking and cracking caused by exposure to thermal cycling between -50°C ve +300°C
Preserves its elasticity when permanently exposed to temperatures up to 250°C.
Improved oil resistance.

In gasket applications where resistance to high temperatures and/or high thermal cycling in car engines, machines, heating systems, industrial ovens, chimneys, etc.
A very good solution for gasket needs of rubber gaskets which is hard to find.
Meets extra high-quality gasket needs for specific applications.

Curing Rate: 3-4 mm/day

Density: 1,05 g/lt

Tack-Free Time: 10 minutes

Operating Temperature: -40°C and +250°C

Application Surface Temperature: Between +5°C and +40°C

Shelf Life: 15 months

Volume:  280 ml

Make sure application surfaces are clean and dry and free from dirt, grease, or lose particles.
Metal surfaces should be cleaned with a proper solvent prior to the application.
Since it cannot be painted over, it should not be applied to surfaces which will be painted later.

It contains minor amounts of volatile chemicals. It must not be inhaled and the application ambiance must be ventilated if used indoors. Since it may cause irritation to avoid prolonged contact of wet silicone to skin. Hardened silicone does not contain any harmful components.

Not suitable for PP, PP, PTFE, neoprene, and bituminous surfaces.
Not over-paintable.