Safe, easy, and ready-to-use.
No run-off, even on vertical surfaces.
Excellent direct adhesion sticks directly to most wet surfaces and most building materials.
It can be applied underwater – ideal for damp and wet conditions during application and over its lifetime.
Protection against rust, damp and corrosion.
UV resistance.
Meets the ISO 11600 standard which defines the physical properties of building sealants.
Approved by water quality organizations for use in contact with drinking water.

Canals and waterways.
Ponds.
Drains and pipes.
Gutters and drain systems.
Chimneys.
Roofing felts.
Concrete bridge decks.
Boats.

Density at 25°C: 1,27 g/cm

Elastic recovery at 23°C: <40%

Consistency: Thixotropic paste 

Dripping Point (after evaporation of the solvent): 200°C 

Extension to Break On Dry Support at 23°C: >100%

Skin Formation: About 2 hours

Complete Curing: About 4 weeks (depending on the surface) 

Shelf life: 36 months 

Volume: 310 ml 

At temperatures lower than +5°C, pre-heating (e.g. in warm water) is advised.
A clean, dry, and dust-free substrate are recommended.
For special applications and/or on wet substrates an adhesion test is advised.
For certain circumstances, a (bituminous) primer is recommended.
For adequate adhesion on a wet substrate, the distance between substrate and nozzle must be as small as possible
Tixophalte must be applied in thin strips or single spots so that the solvent is able to evaporate easily
Any residue can be cleaned by dissolving in a hydrocarbon solvent (white spirit).

Tixophalte hardens as solvent inside evaporates, therefore, ensure that there is adequate ventilation during and after use.
The hardening rate is influenced by temperature, type of substrate, and the applied layer-thickness.
It cannot be applied to a new concrete structure with a high level of residual humidity.
Contact with hydrocarbon solvents, mineral oils, greases and fuels soften the product.